I don't run oil filters.
I just change my oil every 2500 miles (or after a long trip).
1. Run your engine to make sure all your oil is pumped back
to the tank.
to the tank.
2. Then drain it. You can disconnect the return to tank
( I take it off the oil cooler because it's convenient )
3. Install drain plug - add 1/2 quart of fresh oil to tank.
( I use some thinner weight oil )
4. Start engine and pump out remaining old oil
until it pumps clear.
5. Refill tank with oil of your choice . . .
5. Refill tank with oil of your choice . . .
6. I add a bit of Marvel Mystery Oil
NOTE: My neighbor gave me about 10 quarts of oil when he moved.
The price was $1.17 a quart when he bought it !
I use it for this purpose . . .
I run H-D 50wt and 60wt in all my engines without a failure.
With the HP that focker puts out, you shouldn't need oil. Never put oil in my lawn mower. Doesn't leak and runs like a top(Harley).FYI!
ReplyDeleteOn my last shovel I had a quick disconnect plumbed into the return on top of the tank, worked great! I can't seem to find one small enough these days.
ReplyDeleteSame motor modified went 265mph at Bonneville so the potential is there.
ReplyDeleteI have spent more on Harleys than I have in my house. Slow learner.Shits still a joke
ReplyDelete