Noot

You'll need to weld a "backing plate stay" on the lower frame tail for the backing plate anchor stud to bolt to . . . (you c...

CHECK: Tire pressure, oil, primary oil, nut & bolt all the 7/16, 1/2, 9/16, etc.  Make sure everything is sorta tight.  Checked the ho...

Sitting on these rocks trying to figure out how to use a few media devices...and on the ground, all around me were feathers, a bird leg, v...

Here's an early panhead gear cover that's been repaired.  A common problem - they crack around the timer stud boss.  To weld it...

Here's a photo of Mike sitting on Leo Payne's old "street" bike....a machine he restored - and had much input in the cre...

This ol' 1957FL was a real crud when I got it.  I scraped for 3 days as I tore it down.  Soaked most of the parts.  It still destroyed...

There were these postcards you could buy when you traveled to different places - states, national parks, places-of-interest, etc.   The po...

....It indicates you are HOME.  Stay at home.  Don't make any unneeded trips to the grocery story, gas station, stay away from your ...

1952 K Model Case RIGHT Case.    - Lower repair (by Crooks Motorsports) -New Oil Pump Studs - Blasting (by Gelner) - Washing an...

I keep viewing ironhead Sportster heads on Ebay - and the seller describes them as "Branch heads" and they aren't...no...

This thing started right up after sittin' 3 1/2 months in the cold, with temps below freezing most of the time.  I looked all over ...

Click Photo for Large Image A guy needs about 6.5:1 Compression to run the total shit fuel produced by these places.  (no offense to a...

Click Photo for Large View

I guess the reasoning was to keep the oil cooler and prevent the oil from gettin' all hot, and fried all over the top end as it was pu...

The Search Box (IN THE UPPER LEFT) has a Magnifying Glass: ___________________________________ 1. Type a search term or word of inte...

This ol' K is just the best bike.  Not quite ready for a trike . . .  Over back-roads or big-city streets - it's just nea...

The Cedar River came up a bit with all the snow melt (in 2 days) - and now we're getting some heavy rain to wash all the salt and s...

( Click Photo for LARGE View ) Hopefully, I'll be able to pack this thing up again this year - and ride someplace ?  1. We need to...

This is the invitation to the show...pretty neat.  It came in this heavy-duty box, all rolled up with one of those press-seal stamp deals (k...

CLICK ABOVE PHOTO TO ENLARGE A friend of mine gave me this old Cycle World magazine, so I framed it.  Neat picture of ol' George...

It works.  I enjoy trying different combinations - but I just can't seem to find the one that works on this motor.    UPDATE !   I&#...

In his early years, Jay Springsteen and his brother Charles raced short tracks. "Chuck" ran a 360cc or bigger - and the younger ...

One of the best investments you can make for your kick-start Harley 4 speed !  They operate smooth as silk - and I've tested these gea...

They don't use head gaskets.  Just spray the head and cylinder with a couple coats of Harley Hi-Heat Barrel Paint, let dry - and bolt ...

Yes...it's January.  Probably another 2-3 months of cold to deal with here in Iowa.  This is an excellent time to get started on your &q...

I talked to Buddy Stubbs awhile back when I visited Arizona.  These are his personal race bikes he ran short tracks, TTs, desert races, 1/...