It's done now - where's the owner? Need the bench space.
The Nuge
It was so freaking hot, plastic cups, warm beer, 2,100 good folks from Iowa, packed in the Surf Ballroom to hear Ted Nugent do Stranglehold again . . . the band was great - vocals spot on - the Gibson solid body and the Byrdland was shreddin' every note . . . for a 60 some year old guy holding a machine gun - not bad. Not bad at all. He lost the coin toss and had to ride the bus.
Untouchable
Arlen was riding around that day and I followed him to his trailer where we talked about stuff for a bit then helped them unload"The Untouchable" - real nice dude that Arlen Ness.
Skinny Dude Skinny Scoot
I'd give my right nut for a narrow springer like that - well, maybe not.(Only if I get the 19" spool wid it . . .)
Tom Kelly, Larry Watson, Bob Spina
Magoo called Spina and told him Larry passed away. Before I knew Bob Spina, I really didn't know about the guys that paved the way in the custom car and paint industry. Larry Watson was one of them. They forgot more than we'll ever know. (see kustomrama.com for the Larry Watson story)
Iowa Weather - NOW
Temp: 92 F and Sunny
Humidity: 100%
Wind: 25mph gusty
Later: Storms, Possible Hail and/or Tornados
Dinner: Pasta with Wine and a Movie
Humidity: 100%
Wind: 25mph gusty
Later: Storms, Possible Hail and/or Tornados
Dinner: Pasta with Wine and a Movie
Leaky Check Ball
If your ironhead leaks past the oil pump check ball(valve) and fills up your primary and lower end after extended periods of inactivity - Get yerself a needle-nose vise grips and put some small pieces of fuel line (so you don't booger up your rubber line) and pinch the feed line shut.Works for me. Just don't forget to take your grips off - (I always kinda straighten out the line a little before I go rippin' down the road) Maybe I shouldn't be telling you people this stuff???
PS. Zoom in and check my nifty 1/2 link that hasn't flew off yet . . .
How to fix this . . ?
I have a panhead exhaust flange repair kit - but, the flanges are slightly tapered. WTF? I need to know the exact size of the ID(inside diameter) on a panhead pipe(where it slides over the head flange) Anybody have one they can measure? I don't have any panhead pipes yet. Then I can compare my OD on the replacement flanges. Thank You ! Now I just need a machinist and someone who can weld sandcast aluminum.
Favorite Products
Can't live without 'em :Speedy 500 - Takes off sticky shit
Malco Showroom Shine: The best detailer, hands down period
Lincoln Grease Gun in-a-can - Gets in there !
PJ-1 Blue & HD Chain Oil: Both different - both flat out work !
Novus No. 2: Windshields, Paint, Sunglasses - No Problems.
Menchaca Fajita Seasoning: Burgers, Pork Chops, Steaks, Tex Mex (I'm Addicted)
Anything is Possible
Tonite ! FASTER PUSSYCAT Universal City, CA (on the catwalk)
July 16th MINI KISS The Hub-Cedar Falls, Iowa
July 16th MINI KISS The Hub-Cedar Falls, Iowa
July 22nd DAVID ALLAN COE Wildwood Smokehouse-Iowa City
July 23rd TED NUGENT Surf Ballroom-Clear Lake, Iowa
Aug 28th CINDERELLA Tama, Iowa
Sept 12th FU MANCHU First Avenue-Mpls, MN
Oct 19th SOCIAL DISTORTION First Avenue-Mpls, MN
Aug 28th CINDERELLA Tama, Iowa
Sept 12th FU MANCHU First Avenue-Mpls, MN
Oct 19th SOCIAL DISTORTION First Avenue-Mpls, MN
Young Wrench
Conner hooks up the clutch cable on the knuckle.You might as well sign over the title . . .
Steve is now the AMA Dirt Track Race Director and oversees the track conditions at every national event. I saw him race so many times - he has one of the longest racing careers in the history of the sport. 
Heavy Rain, Sun, a Slight Spill, a Mad Shop Cat, a blown strap, a trip to the "Halter Saddle Shop" and now it's reinforced and ready for anything - KICK ASS !!!!!!!!!!!!!!!!!!!!! 
Sturgis Comin' Up !
The Jackpine Gypsies have a whole week of races lined up . . . even the 1/2 Mile is back !
Bob Spina at Spade Bros.
Spina sent me this airbrushed eagle in process on a flaked out job I believe he's currently working on at Spade Bros. If you're in Cali - stop in to the shop sometime and tell them Noot sent ya . . .Spade Bros.
15831 Chemical Lane - Huntington Beach, California.
Ph:(877)957-7233
Have a Great Independence Day Weekend
Classic Shirts
Since I was a kid, I've been given every sort of Harley shirt. I had so many I took about 70 shirts to Goodwill last year. Now they are all over town. It's kinda neat. B&N Cycle was Big Noot's 2nd shop (1969-1973) now a Taco Johns. I drew up the Noot's logo in Jr. High. (now I can't hardly wear an actual "Harley" shirt (for obvious reasons).
Autolite
I got a whole shed full of ironhead Sportsters - and the best plugs to run are Autolites. They don't foul as easy, they're cheap, the tip is on for good - and they index easy. These are non-resistor plugs for points and magnetos . . . Ironhead XLR Heads (long reach plug): Autolite 55
Ironhead Stock Heads: Autolite 4316
K, KH and KR Heads: Autolite 4316
(PS. Don't put the long reach in your stock heads or you know what happens)
Hey Folks . . .
MOTORCYCLE FLAT TRACK RACES
Lee County Fair - Donnellson, Iowa
Wednesday Nite, July 7th - 6:00pm
Wednesday Nite, July 7th - 6:00pm
Let's see . . .
O'Brien, Renzo, Mert, ________, __________, __________, Rayborn, the Brelsfords . . .Can you fill in the blanks???
#17 Checked Out ! Go Hank go . . .
I guess this guy brought his bike in and told Jimmy to just cover it with pinstripes ?Glory Years
Photo of an actual stunt which took place at the St. Paul Minnesota Fairgrounds back-in-the-day. Look at all the people ! It's a packed house !
Subscribe to:
Posts (Atom)
