Skinny Dude Skinny Scoot

I'd give my right nut for a narrow springer like that - well, maybe not.
(Only if I get the 19" spool wid it . . .)

V8 Burnout in the Box

Tom Kelly, Larry Watson, Bob Spina


Magoo called Spina and told him Larry passed away. Before I knew Bob Spina, I really didn't know about the guys that paved the way in the custom car and paint industry. Larry Watson was one of them. They forgot more than we'll ever know. (see kustomrama.com for the Larry Watson story)

Wally's Triumph


This motorcycle has "been there" and "done that" many many times.

Speed is King

Iowa Weather - NOW

Temp: 92 F and Sunny
Humidity: 100%
Wind: 25mph gusty
Later: Storms, Possible Hail and/or Tornados
Dinner: Pasta with Wine and a Movie

Leaky Check Ball

If your ironhead leaks past the oil pump check ball(valve) and fills up your primary and lower end after extended periods of inactivity - Get yerself a needle-nose vise grips and put some small pieces of fuel line (so you don't booger up your rubber line) and pinch the feed line shut.
Works for me. Just don't forget to take your grips off - (I always kinda straighten out the line a little before I go rippin' down the road) Maybe I shouldn't be telling you people this stuff???
PS. Zoom in and check my nifty 1/2 link that hasn't flew off yet . . .

How to fix this . . ?

I have a panhead exhaust flange repair kit - but, the flanges are slightly tapered. WTF? I need to know the exact size of the ID(inside diameter) on a panhead pipe(where it slides over the head flange) Anybody have one they can measure? I don't have any panhead pipes yet. Then I can compare my OD on the replacement flanges. Thank You ! Now I just need a machinist and someone who can weld sandcast aluminum.

Favorite Products






Can't live without 'em :
Speedy 500 - Takes off sticky shit
Malco Showroom Shine: The best detailer, hands down period
Lincoln Grease Gun in-a-can - Gets in there !
PJ-1 Blue & HD Chain Oil: Both different - both flat out work !
Novus No. 2: Windshields, Paint, Sunglasses - No Problems.
Menchaca Fajita Seasoning: Burgers, Pork Chops, Steaks, Tex Mex (I'm Addicted)

Distant Relative?

Glove Dryer

Anything is Possible

Tonite ! FASTER PUSSYCAT Universal City, CA (on the catwalk)
July 16th MINI KISS The Hub-Cedar Falls, Iowa
July 22nd DAVID ALLAN COE Wildwood Smokehouse-Iowa City
July 23rd TED NUGENT Surf Ballroom-Clear Lake, Iowa
Aug 28th CINDERELLA Tama, Iowa
Sept 12th FU MANCHU First Avenue-Mpls, MN
Oct 19th SOCIAL DISTORTION First Avenue-Mpls, MN


Young Wrench

Conner hooks up the clutch cable on the knuckle.
You might as well sign over the title . . .

Dirt Bikes

Sturgis Comin' Up !

The Jackpine Gypsies have a whole week of races lined up . . . even the 1/2 Mile is back !

Bob Spina at Spade Bros.

Spina sent me this airbrushed eagle in process on a flaked out job I believe he's currently working on at Spade Bros. If you're in Cali - stop in to the shop sometime and tell them Noot sent ya . . .
Spade Bros.
15831 Chemical Lane - Huntington Beach, California.

Ph:(877)957-7233
Have a Great Independence Day Weekend

Classic Shirts





Since I was a kid, I've been given every sort of Harley shirt. I had so many I took about 70 shirts to Goodwill last year. Now they are all over town. It's kinda neat. B&N Cycle was Big Noot's 2nd shop (1969-1973) now a Taco Johns. I drew up the Noot's logo in Jr. High. (now I can't hardly wear an actual "Harley" shirt (for obvious reasons).

Life is a blurr . . .

The older you get - the faster it goes - Drink PBR . . .

Autolite

I got a whole shed full of ironhead Sportsters - and the best plugs to run are Autolites. They don't foul as easy, they're cheap, the tip is on for good - and they index easy. These are non-resistor plugs for points and magnetos . . .
Ironhead XLR Heads (long reach plug): Autolite 55
Ironhead Stock Heads: Autolite 4316
K, KH and KR Heads: Autolite 4316

(PS. Don't put the long reach in your stock heads or you know what happens)

Hey Folks . . .

MOTORCYCLE FLAT TRACK RACES
Lee County Fair - Donnellson, Iowa
Wednesday Nite, July 7th - 6:00pm

Let's see . . .

O'Brien, Renzo, Mert, ________, __________, __________, Rayborn, the Brelsfords . . .
Can you fill in the blanks???

Glory Years

Photo of an actual stunt which took place at the St. Paul Minnesota Fairgrounds back-in-the-day. Look at all the people ! It's a packed house !

Pure Business

I just remembered . . .

I forgot to weld something - shit, damn - oh well.

The Most Famous Dirt Tracker

Springfield Mile about 10 years ago. I get this deal to work with Dave Despain and help out with the "Hall-of-Fame Race." I'm talkin' to Carroll Resweber (yes, the one and only) about this motorcycle. He didn't think it was the same bike. Anyway, his buddy painted the duck on the tank. Along comes one of the "Davidsons" from the factory. He told me as long as they were paying me money to race - it had better say Harley-Davidson on the tank. So, we had to change it. Carroll Resweber won the #1 Plate in 1958, 1959, 1960 and 1961 - then he got all busted up.
He autographed my 1961 AMA Motorcyclist Magazine I brought with me - with a huge centerfold of him inside sliding around on this bike (or one like it). I think this is the most famous flat-tracker of them all . . . now up for discussion.