My Old Basement



My (very old) real estate abstract shows a "building foundation" permit issued in 1873.  Another permit issued in 1876 and one in 1899.  This place has been here a long time, since the founding.  Wild Bill was still alive when they broke ground.  One of the first homes of the city.  The basement has no drain.  It stays dry unless we have 8+ inches of rain in 24hrs, then it can get damp.  It's always cold down here, and very quiet.
It has a certain historical vibe to it.  It took years of conditions to get this vibe.

I was going to mud and paint the walls - seal it all up - but, that would: A. Require me to do a lot of work and B. Take away the feeling and the look.  It gives the spiders and millipedes a place to hide. Maybe a colored light in a corner, with a bar stool ?

A Space In Time


This record is very good.  Alvin Lee.
Bought at this year's Thresher's Reunion of all places . . .

Rat Fink Ring



Hey Kids !  My wife found this in an antique store and bought it for me.  $1.00  I looked in my Big Daddy Roth book, and there it was !  "You too can be a Rat Fink !" 

1966 Malibu


Some guy told me this was one of the first (if not thee first), Sony cassette deck and receiver for autos.  I thought about yankin' it out a couple times, but it works perfect - and my Maxell UDXLII chrome tapes still work great with my recorded 80s rock hits !  Get's AM stations decent too . . .


60s Chevrolets are the best

Dick O'Brien (left)

Nobody did more for Harley-Davidson Racing than O'Brien as far as I'm concerned.  Sure, the racers did their jobs too . . . but, O'Brien got the money and used his know-how to make those motorcycles faster and win races, when Harleys weren't the fastest.  He got that aluminum XR built, he kept the factory race team going . . . and convinced the execs to Win on Sunday, and Sell on Monday.  He was tough, and liked to win, but I heard he congratulated the competition when it was due . . . but, came back and beat 'em the next time.
An Orange and Black stampede from the 50's through the 70s with Dick O'Brien at the reigns.
Photo: O'Brien and Cal Rayborn

I still need a muffler like this . . .


1 3/4" inlet

-52R Part Number


Magneto Parts

Number 36 and 39 for weak knees . . .
Number 35 for a badass M'FRs

Lance Jones 23c



Above: Jones being interviewed by Dave Despain
Lance Jones of Gadsden, Alabama has been a life long motorcycle racer.  His early years saw victories on all types of dirt tracks at Junior and Pro levels . . . all across our great country.  Jones is always a threat to win. He's still known to participate in "legends" competition.  Lance is a member of The Class of '79 with notables as Wayne Rainey and Scott Parker, an organization that raises funds for currently injured racers and their families. 

This photo . . .

 . . . reminds me of someone from Plainview, Minnesota.

The Story of My Life

Ironhead flywheels . . . I've seen more sets of these than the average human.

PJ1, Klotz, Lucas, Bel-Ray, Champion, H-D and Fram?

FLAT TRACK: Bore X Stroke

88 X 61.5mm  Indian
76 X 97mm    Sportster XLR 900
76 X 81mm    Iron XR
79 X 76mm    Aluminum XR
83 X 60mm    Kawasaki

I threw the XLR in there for reference !

Mouse Trap

This thing was a mess - hopefully usable now?  I want to try and get it to function just perfect someday - so when you pull the clutch lever, it almost stays in - on it's own.  Low clutch lever force. Clutch assist.  It's kinda neat when they work as intended.

Wishbone Frame



Jordan fixed it for me . . . now I got to work-it awhile . . .

Rigid Horseshoe

I pressure tested it, and it leaks out a weld on the bottom.  Mount tab is broken too.  Some people are sure hard on parts . . . call it "use" or "just abuse?"

I'm thinking about this . . . uh, oh.

How about we make a plug - slightly thread it in, just below the surface - leave a little bevel at the end - weld it in, and hopefully not get it too hot and warp the shit out of the mating surface.  Wiley says to warm it in the oven first, then weld it - then back in the oven to cool off.  Sound like a plan ?

The Bad:

New chain (nos in the box) I got off E-bay.

The Good: Sunday Ride


 It was a beautiful day . . . except for the occasional attack of Asian Beetles and No-See-Um bugs . . .
The farmers in the fields.  Harvest in full swing.  Watch out for combines and grain wagons !

The Badass: Harley KHK

I got this thing running . . . like the sound of a new rock record !

Moments in Time

 Brad Baker's 450 before he crashed out of the lead . . .
Springfield All-Star Short Track 2016
 '64 XLH and Jeremiah Armenta at Davenport, Iowa
 Buchanan's Spoke debacle
 My great uncle, Billy Strauser of Wolf Point, Montana
 Ken Pressgrove and H-D KR750
 Gary Nixon and tuner . . . and a cigarette
 Wrong manifold for this ULH
Preserving American Heritage !
Clifford Vaughs in white pants (photo by Danny Lyon)

CHVRCH of Choppers

My dad must really like his COC shirt?  He wears it quite a bit.  My COC "Champion" shirts have a letter U, and are an older logo version.  I somehow ended up with 3ea of these . . I can wear them all week, and folks think I'm still wearing the same shirt.  One time, we each had on these shirts out in the shop, when this guy took me aside and asked, "What's Church Street Bikes?"  I told him.  Then, I saw him a different day and he said he went to the library and looked them up.  I'm thinking, "Card Catalog?  Books?"  I forgot they have computers at the library . . .

Springfield, Illinois

At over 120+mph . . . that's incredibly fast to be moving with nothing but packed dirt under your two wheels.  Track preparation is crucial.  You need equipment for track preparation, you need the track-prep managers to exchange information on "how it's done" for motorcycles.  It's different than horses.  Accidents happen and they've made positive track and safety improvements since the days of Leonard & Resweber . . . Flat track motorcycle racing is a dangerous sport - even for professionals.

Charlotte Kainz



I met Charlotte and her dad, at the first Mama Tried Show in Milwaukee.  We're both in the little Vimeo movie that accompanied the show that year.  I talked with them quite a bit during the weekend.  She had her bright yellow XR750 outfitted with ice tires for the show.  Charlotte was very nice, so was her dad.  Charlotte was so petite and small, I wondered how she could handle a motorcycle at all, until I saw her race.  This last (Labor Day Weekend) at Springfield, after a poor start - she charged through the field to just miss a transfer spot.  There were some young girls in front of me who were goin' absolutely bonkers whenever Charlotte made a move, or scored a pass - they were going crazy, cheering with high fives, laughing and hugging.  She was their inspiration, showing what a young girl could do with practice and determination. It made the racing (for myself) all the more exciting when 35L Kainz hit the track with her orange/red helmet.  Now she's gone, and it's gonna hurt for many - for a long time, when you're taken away doing something you love to - at only 20 years young.  She'll be missed - and I hope the other racers never forget what can happen in this sport.  Look out for one another - do it for Charlotte Kainz, and for you, and your competitor's family and friends. 
My condolences to all Charlotte's family, friends and fellow racers - and there's many of you.

__________________________________________
Kyle McGrane

More terrible news I didn't want to hear.  Kyle was in a separate racing accident as Charlotte, (at the same track) and he fought for his life in the hospital, but passed away yesterday (Monday 09-26-2016).  Any time a flat track racer from our community is taken - it's such a loss.  You know all the names each year.  The name McGrane has been a dirt-track family name for many years.  Kyle was a fast, upcoming racer who was very talented.  You know this is a dangerous sport when even up-and-coming professionals can fall victim to crashes and serious injuries.  More heart-felt condolences to the entire McGrane family and friends and fellow competitors.

I've been a motorcycle (flat track) fan since 1975, and this is the part I hate the most.  The fact that it's a fast paced and exciting sport is what makes it so good . . . but, I hope this new American Racing sanctioning body can have some serious meetings about safety in the sport - and improve conditions or possibly starting procedures to give more room for racers in early laps (when these situations tend to happen, if you look at the history) especially on these "rough" and challenging racing venues.
 Kyle McGrane

________________________________________________

NOTE: I remember one year at the Springfield Mile when Chris Carr and Scott Parker became spokesmen for all the racers, after the track (due to very heavy rains) was sticky, and wet - causing practice crashes and injuries. Coolbeth had one of the worst crashes of his career that day.  Racers were advised they would not be points-penalized if they elected not to ride.  Maybe a senior member of the racing fraternity could be elected to govern track conditions, etc?  This may hold race promoters "more responsible" for track conditions and the racing surface.  In general, if the racers show up, and the track is not acceptable to 90% of the participants, action is taken: ie: travel money is dispersed, etc.

Anything towards safety goals would help . . . none of us want this to ever happen again, to any one of our racers.  Deterring injuries (and worse, fatalities) in this sport should always be a top priority.

I feel this would not effect the quality of racing,
              but, actually improve it.

Respectfully.
- R. Noot

Fixing old, broken and abused parts . . .

It will live again.

PJ1 Satin Black: FAST BLACK

This is the best paint (I've found) for Shovelhead and Sportster cylinders, cast iron heads . . . Anything you want satin black.  It's perfect.  Not too flat, not too gloss.  It looks great and holds up very well.  I paint head bolts with it too, then you can 'touch-up' after you torque them (same paint as the heads or cylinders). 
Cures fully after running the engine.  Smells terrible !  Wear a mask . . . clean the spray tip after use.